Des96 Posted December 14, 2012 Share Posted December 14, 2012 Hei, Sitter her å prøver å bli klok på PPC grenene. Har funnet ut av de fleste, men ikke disse: PN1 = Feltrevolver (FR60) PN2 = Feltpistol (FP60) PN3 = Spesialrevolver (SR48) PN4 = Spesialpistol (SP48) Hvordan foregår konkurranse på disse og hva for krav er det til våpen/kaliber og utstyr? Jeg har sett på http://www.ppc1500.no" target="_blank og reglementet http://www.capasart.com/pdf/Utgave107.pdf" target="_blank Quote Link to comment Share on other sites More sharing options...
gubben38 Posted December 14, 2012 Share Posted December 14, 2012 Med feltrevolver og militærpistol skyter du 60 skuddsmatch Med spesrevolver og pistol 48 skuddsmach , samme som standardklassene i PPC Quote Link to comment Share on other sites More sharing options...
villmannen Posted April 30, 2015 Share Posted April 30, 2015 Må ein ha kurs for og skyta feltpistol? Quote Link to comment Share on other sites More sharing options...
Ken Adams Posted April 30, 2015 Share Posted April 30, 2015 Ja, må ha PPC kurs da trekk, omlading og skifte av skytestilling er en del av konkurransen. Quote Link to comment Share on other sites More sharing options...
High Master Posted May 1, 2015 Share Posted May 1, 2015 Det er ikke krav til eget kurs i PPC1500 for å kunne delta i åpne stevner/konkurranser. Tror det er en misforståelse blant skyttere der ute om at det er et krav. Det er blitt sagt at det er anbefalt å ta et kurs for å få en innføring i reglementet og gjennomgang av de enkelte øvelsene, og ikke minst få gode tips om våpen, utstyr og skytestillinger! I henhold WA1500 reglementet så kreves det kun medlemskap i NSF for å kunne skyte PPC1500 internasjonalt. INDIVIDUALS 2.1 Members of the WA1500 affiliate organizations Any individual who is a member in any national shooting federation. 2.2 Eligibility Authentication It is the competitor’s responsibility to have his current classification in his possession when entering and competing in precision pistol competition tournaments. The competitor must be a member in good standing of his respective national shooting federations or associations in order to enter WA1500 Registered competitions. 2.3 Guest competitors The local Sponsor may agree guest competitors in a Match or tournament. The sponsor is responsible that all conditions of an individual member are fully filed. NSF reglement Jeg har forstått det slik at NSF ved fagkomite pistol har inntatt PPC1500 som skyteprogram iht. gjeldende WA1500 Rules (nå utgave 2013).Det er ikke inntatt krav i NSF sitt reglement om at det kreves et særskilt kurs i PPC1500 for å kunne delta i konkurranser, på lik linje som det ikke kreves eget kurs for å skyte felt eller baneprogram! Så lenge en skytter er medlem av NSF gjennom sin klubb og har gjennomført sikkerhetskurs, er det åpent for alle å skyte PPC1500. Men det er anbefalt å få en innføring i reglementet og sikkerhet, spesielt hva gjelder sikker våpenbehandling, omladning, scoring under matcher og de forskjellige skytestillingene. Det er ikke krav til eget PPC1500 kurs i f.eks. Tyskland eller Tsjekkia, mens det i Sverige er krav for svenske skyttere å ha et godkjenningskurs for PPC1500. Men det er fritt frem for norske skyttere og delta i konkurranser i Sverige uten svensk godkjenningskurs, så lenge skytteren er medlem av NSF, ref. WA1500 Rules pkt. 2.1. NM - EM - VM - Internasjonale konkurranser Alle nasjonale og internasjonale PPC1500 konkurranser er åpent for norske skyttere som er medlem av NSF, så det er bare å melde seg på NM og VM...og andre åpne stevner på terminlisten... Link til NM i PPC1500 i Sarpsborg 19-21. juni :http://www.ppc1500.no Link til VM i PPC1500 i Stockholm 13-16. august: http://www.ppc1500wc2015.se/ Link til WA1500 (internasjonale forbundet): http://www.wa1500.org Quote Link to comment Share on other sites More sharing options...
Ken Adams Posted May 1, 2015 Share Posted May 1, 2015 Se der ja. Tok kurset i Sverige. Men i ærlighetens navn, det burde være et krav. Quote Link to comment Share on other sites More sharing options...
Ken Adams Posted May 2, 2015 Share Posted May 2, 2015 Tatt fra Oppegaard SL sin hjemme side "OSL godkjenningskurs for nye PPC skyttere (se terminlisten) Skyttere som vil konkurrere innen PPC skyting må gjennomgå et obligatorisk godkjenningskurs" Ikke rart det jeg trudde dette kurset var noe som man var nødt til å ta Quote Link to comment Share on other sites More sharing options...
wheelgunner686 Posted May 2, 2015 Share Posted May 2, 2015 Ja, ble ikke akkurat fremstillt som noe man kunne velge bort da jeg tok det heller ... Quote Link to comment Share on other sites More sharing options...
High Master Posted May 3, 2015 Share Posted May 3, 2015 Som jeg skrev ovenfor så tror jeg at "kravet" til å ha kurs er en misforståelse og som trolig henger igjen i fra de første årene PPC1500 ble skutt i Norge. Det var først snakk om å få PPC1500 under Dynamisk Sportsskyting som har et krav om kurs. Dette ble også praktisert for PPC1500 i de de 2-3 første årene. Etter at PPC1500 ble inntatt som program i NSF, så kan ikke jeg se av reglementet eller andre vedtak at det er et krav til eget kurs for å kunne skyte PPC1500! Jeg er ikke uenig at de som vil begynne med PPC1500 vil være tjent med å få en innføring i regler og sikkerhet. Reglene og sikkerheten er ikke så vanseklig og sette seg inn, men det kan være greit å få en innføring i skytestillinger og annet som kan være greit å tenke på under skytingen. Det gjør det mye lettere å delta i konkurranser når man er trygg på sikkerheten og reglene. Jeg tok kurs i Sverige og synes det var veldig nyttig og bra. Det bidro til at jeg fikk en god start i de første konkurransene og at vi som tok kurset også var med i VM i Tyskland etter 3 stevner i Sverige . Vi var helt trygge på sikkerhet og reglene for scoring og skytestillinger, som gjorde at vi fikk en veldig god opplevelse og motivasjon til fortsette med PPC1500... Quote Link to comment Share on other sites More sharing options...
ojoh Posted May 4, 2015 Share Posted May 4, 2015 Det er nok riktig som High Master skriver at PPC kurset ikke er obligatorisk. Teksten på vår side ble skrevet av meg i en fase hvor jeg selv var i "opplæring" og tok det som en selvfølge at dette kurset måtte være obligatorisk. ( jeg skal endre teksten på vår hjemmeside.... ). Men det sakt, så tror jeg de fleste vil ha stor nytte av et kurs før de begir seg ut på en PPC konkurranse. Det er jo unektelig kjedelig å bli sendt hjem midt i konkurransen fordi man gjøre en graverende sikkerhetsfeil fordi man ikke er drillet i regler for PPC. Gjennomføring av en match krever også forkunnskaper og jeg vil anta at det ikke frister til gjentagelser å stå på en PPC linje å ikke ha snøring på hva som skal skje når hornet går... Feil skytestilling "belønnes" som kjent med trekk av beste treff i hht det antall skudd som er avfyrt i feil stilling. Mht NSF og PPC er vi fremdeles ikke spesielt i fokus og får minimalt med omtale, og det er litt synd fordi jeg tror PPC er et flott tilbud til feltskyttere og bane skyttere som ønsker seg noen andre utfordringer, og det er en konkurraseform som krever lite mannskap og administrasjon for gjennomføring. Øivind, Oppegård SL Quote Link to comment Share on other sites More sharing options...
Ken Adams Posted May 4, 2015 Share Posted May 4, 2015 støtter den ojoh Quote Link to comment Share on other sites More sharing options...
Medic82 Posted May 4, 2015 Share Posted May 4, 2015 Ta PPC kurset, koster knapt noen ting og møter mange nye folk. Gøy er det også. Quote Link to comment Share on other sites More sharing options...
ojoh Posted May 5, 2015 Share Posted May 5, 2015 (edited) Trådstarter spurte om PPC klasser. De fire klassene som er listet er nasjonale PPC klasser som ikke må forveksles med de internasjonale klassene. De to første er 60 skudd matcher for de norske revolver og militærklassene. Våpen godkjent i hht til det nasjonale "NSF Feltpistol reglementet" kan brukes. For disse to klassene er det noen fellestrekk mht våpen mellom de NSF nasjonale feltreglementet og det internasjonale WA1500 reglementet, men de fleste M/R feltvåpen som benyttes i de nasjonale øvelsene vil nok kun bli godkjent i "open" divisjonen for 60 skudds matchene i WA1500 reglementet. Nasjonale M/R feltvåpen vil normalt kunne gå inn 150 skudds matchene med noen restriksjoner (bla. max 6" pipe...) De to neste er tilsvarende 48 skudds matcher for de nasjonale spesial pistol og spesial revolver, altså våpen godkjent for disse nasjonale feltklassene (må passe i målkassen). Det eneste de har felles med det internasjonale PPC reglene er match programmet for 48 skudds øvelsene. I de nasjonale spesial P/R klassene er det anledning til å benytte kalibre og gjøre modifikasjoner på våpen som det ikke er anledning til i de internasjonale klassene innen 48 skudds matchene. Der benyttes standard /tjeneste ("service") våpen i cal 9mm til .45 for pistol og kun cal 38 (ikke magnum) for revolver, hvor modifikasjoner på våpen ikke er tillatt (noen få unntak). Det er også ammunisjonskrav mht kulevekt/form og faktor (powerfactor). I Oppegård SL tilbyr vi kun matching i hht de internasjonale PPC reglene fordi vi ønsker at våre skyttere skal tilpasse seg de internasjonale reglene, som gir trening til konkurranser utenfor Norge (dvs Sverige). PPC skyting er ikke alene grunnlag for erverv av våpen, og var meg fortalt en av betingelsene for at NSF antok PPC i sitt aktivitetsprogram, men "PPC tilpasset" militærpistol eller revolver er et utmerket våpen for de nasjonale feltøvelsene. Edited May 5, 2015 by Guest Quote Link to comment Share on other sites More sharing options...
High Master Posted May 5, 2015 Share Posted May 5, 2015 I NM i PPC1500 skytes det kun de internasjonale klassene og Modified 1500 (R/P1500 med optiske sikter). Som Øivind skriver så er det andre regler for standardklassene i PPC1500 enn det som følger av de nasjonale reglene for militærpistol/revolverfelt, og spesialpistol/-revolver. Alle disse er tillatt brukt i Open, P/R1500 og Modified1500, men spesialpistol/-revolver er kanskje ikke de mest optimale våpen å skyte med på 50 yard og det gis desverre ikke bonuspoeng for bruk av spesialvåpen... Nedenfor er relgene for de enkelte våpenklassene i PPC1500, og merk spesielt 3.10 Safety parts som gjelder for alle våpenklasser: 3.1 Revolver 1500 A revolver chambered to fire center-fire cartridges .32 caliber or larger. (a) Barrel Barrel length not to exceed 6 inches (135 mm). (b) Sights Sights may be fixed or adjustable, front sight may not extend beyond the muzzle, the maximum sight radius to be no more than 8.5 inches (216 mm). Hooded or telescope sights prohibited. Sight guards may not extend rearward more than 2 inches (51 mm). © Trigger If the revolver has single-action capability the single action trigger pull must be at least 2 ½ lbs. (1135 g). A Trigger stop is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. All revolvers shall use Double action on every stage except on 50 yards/meters were single action is allowed. 3.2 Pistol 1500 Center-fire semi-automatic pistols of .35 caliber or larger, including 9mm and .45 ACP caliber pistols. (a) Barrel Barrel length not to exceed 6 inches (153mm). (b) Sights Sights may be fixed or adjustable. Front sight may not extend beyond the muzzle, maximum sight radius not more than 8.5 inches (216 mm). Hooded or telescope sights prohibited. Sight guards may not extend rearward more than 2 inches (51 mm). © Trigger Trigger pull not less than 3 lbs. (1360 g) single action or for those of double action capability only. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting and a separate thumbrest in front of the trigger. 3.3 Open Match A revolver chambered to fire center-fire cartridges .32 caliber or larger. A center-fire semi-automatic pistol of .35 caliber or larger, including 9mm and .45 ACP. (a) Barrel No restrictions. (b) Sights No restrictions other than the national firearm laws. Optical or electronic, fixed or adjustable. Front sight may not extend beyond the muzzle. © Trigger If the revolver has single-action capability the single action trigger pull must be at least 2 ½ lbs. (1135 g). A Trigger stop is allowed. Trigger pull of a pistol not less than 3 lbs. (1360 g) single action or for those of double action capability only. Recoil control based on compensators, barrel venting or barrel porting is allowed. All revolvers shall use double action on every stage except on 50 yards/meters where single action is allowed. 3.4 Distinguished Revolver A revolver capable of chambering and firing standard 158 grain lead, .38 special load. All revolvers shall use Double action on every stage except on 50 yards/meters were single action is allowed. It must be a factory manufactured revolver with no external modifications. No external or internal modifications may be made to the revolver as manufactured and sold by the factory of origin. Except as provided for below no parts may be removed from the revolver, either externally or internally, nor may any be added. (a) Barrel Barrel length not to exceed 6 inches (135 mm). (b) Sights Fixed or adjustable rear sights from any manufacturer are acceptable. No 3-position-sight or sighting rib is allowed. An adjustable front sight is not allowed. Front sight can have a maximum height of 10 mm. ©Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when firearm is cocked for single action firing. Triggers will be weighed. Any trigger, sold by the original manufacturer of the revolver, without modification, may be used. The honing of the sear or sear notch in the hammer to make a more crisp trigger pull and smooth the action and/or to maintain the required minimum trigger pull is allowed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. See appendix to this rulebook. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. The following are not allowed: trigger shoes; compensator; any external trigger stop device; use of any filler substance to make the front of the trigger smooth; filing or otherwise removing ridges on the trigger; filing or otherwise reducing the trigger width or length, tape on stocks, thumb rests or stocks flared at the base. Any substance (except sweat preventers) which results in a sticky surface to the stock or hand. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. 3.5 Distinguished Pistol Factory manufactured (catalogue item) center-fire semi-automatic pistol of .35 caliber or larger (including 9mm and .45 ACP caliber pistols, .40 S&W and 10 mm Auto). Any accessories, parts and components which are manufactured to duplicate, in materials, shape and dimensions, the original as offered by any of the manufacturers of the pistol, will be accepted. No external modifications are permitted. (a) Barrel Barrel length not to exceed 5 inches (127 mm). Replacement barrels cannot be longer than the original. (b) Sights Open sights, from any manufacturer are acceptable. Rear sights may be fixed or adjustable and fixed open front sights may not extend beyond the front of the slide, with maximum sight radius not more than 7.5 inches (191 mm). © Trigger Trigger pull must not be less than 3 lbs. (1360 g) single action or for those of double action capability only. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand. Finger groove and slip on grips are allowed. Thumb rest grips/stocks or those flared at the base are not allowed nor is tape on the grip or any substance (except sweat preventers) which results in a sticky surface to the grip or hand. Specifically prohibited are full-length Bo-Mar type ribs on the slide, trigger shoes, any system of recoil control based on compensators, barrel venting, or weighted grips or grip panels. 3.6 Standard Revolver 4” A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grip which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 4 inches (102 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when firearm is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.7 Standard Revolver 2,75” A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grips/stocks which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 2,75 inches (70 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when gun is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.8 Standard Revolver 2,75” 5 shot A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grips/stocks which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 2,75 inches (70 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. Manufacturer’s sights may be replaced with luminescent night sights (subject to the national firearm laws). © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when gun is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.9 Standard Semi-Automatic Pistol Mass produced (at least 1,000 produced), factory manufactured (catalog item), center-fire semi-automatic pistol, .35 caliber or larger. (a) Barrel Barrel length not to exceed 5.5 inches (140 mm). (b) Sights Fixed sights only. Manufacturer’s fixed sights may be replaced with other fixed sights such as three (3) dot systems or luminescent night sights if not banned by national firearms laws. © Trigger Trigger pull not less than 3 lbs. (1360 g) single action or for those of double action capability only. The only modification or replacement part allowed is the magazine bumper pad. Specifically prohibited are external modifications except for those listed above. Specifically prohibited are full-length Bo-Mar type ribs on the slide, trigger shoes, extended slide release, extended magazine well funnel and any system of recoil control based on compensators, barrel venting or barrel porting, or weighted grips or grip panels. The pistol must be equipped with standard issue or commercially procured grips of the same size and design. Finger groove and slip on grips are allowed. The grip may be modified or changed because of the size of a competitor’s hand. Thumb rest grips/stocks or those flared at the base are not allowed nor is tape on the grips/stocks or any substance (except sweat preventers) which results in a sticky or dry surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.10 Safety parts No internal modifications may be made that would render the firearm less safe than originally designed by the manufacturer. All standard safety features of the firearm must operate properly. Quote Link to comment Share on other sites More sharing options...
ojoh Posted May 5, 2015 Share Posted May 5, 2015 .. beklager, jeg så ikke da jeg postet mine rettelser at HM hadde lagt ut den fulle og korrekte beskrivelsen av klassene. Men finnes det noe offisielt NSF PPC reglement for de nasjonale øvelsene - jeg vet at det finnes en "uoffisiell" norsk oversettelse av "WA1500 rulebook" som bla inneholder noen elementer som ikke er beskrevet i sistnevnte - bla avsnittet om "Safety sone" som merkelig nok ikke er bekrevet i det internasjonale regelverket (så vidt jeg kan se...). Kan vi utfordre NSF Fagkommite Pistol til å få PPC på dagsordnene og synliggjøre dette flotte programmet mer på hjemmesiden til NSF? Quote Link to comment Share on other sites More sharing options...
Hassel Posted May 5, 2015 Share Posted May 5, 2015 Merk at PPC grenene i seg selv ikke gir behov for ervev av våpen. Quote Link to comment Share on other sites More sharing options...
BigBore Posted May 6, 2015 Share Posted May 6, 2015 Vedr ammo i Standard Revolver 2,75" Jeg har forstått det slik at det MÅ brukes 158grs. Men det står jo faktisk bare at den skal kunne kammre og skyte, ikke nødvendigvis burke dette... " A revolver capable of chambering and firing standard 158 grain lead, .38 special load. " Ja.. jeg vet jeg er vanskelig.. Quote Link to comment Share on other sites More sharing options...
HK416 Posted May 6, 2015 Share Posted May 6, 2015 Sjekk her: http://www.wa1500.org/off_duty_revolver_match.htm" target="_blank Quote Link to comment Share on other sites More sharing options...
ojoh Posted May 6, 2015 Share Posted May 6, 2015 ser den, men du får det presisert i f) og g) seksjonen under... 3.13 Ammunition (a) General No high speed or Magnum ammunition will be allowed. All ammunition must be loaded for and produce sufficient velocity to pass through the target and the backer. Shots which do not pass through the target and the backer will be scored as misses. (b) Revolver 1500, Open Match Either hand loaded or factory loaded ammunition of .32 caliber or larger may be used. © Pistol 1500, Open Match, Either hand loaded or factory loaded ammunition of .35 caliber or larger may be used. The semi-automatic function of the pistol must work properly. (d) Distinguished Revolver Either hand loaded or factory loaded ammunition of .38 special, 158 grain. No midrange wadcutter ammunition will be allowed. A minimum power factor of 110 is mandatory. (e) Distinguished Pistol Either hand loaded or factory loaded ammunition of caliber .35 or larger may be used. No midrange wadcutter ammunition will be allowed. A minimum power factor of 120 is mandatory. (f) Standard Revolver 4” Either hand loaded or factory loaded ammunition .38 special, 158 grain. No midrange wadcutter ammunition will be allowed. A minimum factor of 80 is mandatory. (g) Standard Revolver 2,75”, Standard Revolver 2,5” 5-shot Either hand loaded or factory loaded ammunition .38 special, 158 grain. No midrange wadcutter ammunition will be allowed. A minimum factor of 80 is mandatory. (h) Standard Semi-Automatic Pistol Either hand loaded or factory loaded ammunition. Caliber .35 or larger may be used. No midrange wadcutter ammunition will be allowed. A minimum factor of 120 is mandatory. (i) Chronograph and Power Factors Power factor is calculated by velocity (fps) x projectile weight (grains) / 1000. Quote Link to comment Share on other sites More sharing options...
ojoh Posted May 6, 2015 Share Posted May 6, 2015 ...og for å dra ammunisjonsdiskusjonen litt videre. Så står det ingenting i 3.13 ammunisjonen reglene om at det skal være bly eller mantlet, selv om det står at revolveren skal kunne skyte 158 grs blykuler. Her bør vel reglene kunne tolkes til at man står fritt til å velge rene bly, belagte eller mantlede prosjektiler, men at de skal veie 158 grs og kunne holde angitt PF. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.