ivalo-olavi

..because short barrel: Lapua E346 SP 3,2g bullet and N-120 1,25g

Burningrate between N-320 and N-330. 9mmLuger-case is too small for N-32C.

I don´t understand your lanuage. Here you are: http://www.archipelagobullets.fi/norsk.html

With Svennis-way also VihtaVuori Reloading Guide Edition 7. ( The latest one, I think ).

I don´t understant you language. 13g Lapua Mega; BD .300 and BC .344

VihtaVuori Reloading Guide Edition 6: Test barrel 580cm. 1 in 14" twist. Lapua case, Trimlenght 43mm. 52gr Sierra HPBT. C.O.L: 54mm. N-130 19,6 - 21,4gr 864 - 922m/s N-133 21,4 - 23,7gr 867 - 915m/s N-135 23,0 - 24,7gr 891 - 944m/s

S&B=Schlecht & Billig God Jul och Lyckligt Nytt År.

I use total copperplated cast bullets. http://www.archipelagobullets.fi

I have had troubles with repriming.

Your cartridge or caliber?

VihtaVuori N-150 42,4 - 47,8gr. N-550 48,1 - 50,6gr. N-160 52,2 - 53,7gr.

I have Dan Wesson-revolver 10"-and T/C G2 .357 Rem Maximum 14" barrel. I use Redfield Five Golden Star 4x pistolscope with T/C. I am reloader and my favorite load to T/C is 158gr Hornady HP XTP-bullet, VihtaVuori N-110 powder 1,35g (621m/s, 2-2,5cm croups / 5 shots /100m). I have also silencer for T/C. Then I reload subsonics / cowboys loads using VihtaVuori N-32C/Tinstar powder and Archipelago copper plated resitzed cast bullets. Sorry, I cant read or write Norwegian. Also my English is very bad.

By the way: Only to my rifle Mauser .308 Win, heavy barrel with thight chamber. 1/12" twist. PPU 150 gr FMJ BT. (More heavy bullet keyholes). Sako cases. Vihtavuori N-320 powder.CCI primers: 0,49g/7,56gr 329m/s 0,46g/7,09gr 285m/s 0,43g/6,63gr 237m/s Tikka 66 .308 Win: already 0,54g/8,33gr was subsonic.

Mr Kenny, I want the cases are no soot, therefore perfer a faster powder. So to 55gr bullets very clean burning Vihtavuori N-133, benchcrest shooters powder.

OK mr "Sako .30-06". Your gun must to have 1 in 7" twist. I have only 1 in 12".

10 points to Arne.

I use those http://www.archipelagobullets.fi/

Jag menar, att .223Rem hylsorna är för liten med VihtaVuori N-140 och N-540. För min .22-250 Mauser N-540 är ok.

Jag har T/C Contender 10" bullbarell. I use N-310, N-320, N-350 and 3N37 powders. H&N 125gr N-310. 0,22g 340m/s Lapua R-381 3N37. 0,46g 457m/s H&N 125gr 3N37. 0.46g 477m/s H&N 125gr 3N37 0,38g 392m/s H&N 125gr 3N37 0,42g 428m/s Lapua R-381 N-320 0,36g 426m/s Lapua R-381 N-350 0,53g 483m/s Lapua R-381 N-320 0,34 393m/s Lapua R-381 N-350 0,46 453m/s Archipelago 125gr N-320 0,30g 373m/s Archipelago 125gr N-32C "Tin Star" 0,28g ?m/s Archipelago 125gr N-32C "Tin Star"0,30g ?m/s Archipelago .357" 158gr N-350 0,30g 307m/s (for silencer). Archipelago; copperplated resitzed FN. H&N copperplated RN. Lapua FMJ RN

I use N-133, "benchcrest powder", with 40-69gr bullets for my .223Rem.

I shoot just for fun with my 6 short and 8 long guns, because I have a couple of days 71 years. I reload all my cartridges. Ofcourse not .22LR or 12/70.

The cheapist 9,3 bullets are S&B SP 18,5g / 285gr and also PPU /PRVI PARTIZAN 285gr SP

I have Dan Wesson .357SuperMagnum-revolver. If I reload 125gr bullets with high speed loads, gas cutting is very strong, I think. If I will to shoot those bullets, I use my T/C G2- pistol .357 Rem Maximum (SuperMagnum). Jag har DW SuperMag-revolver. När jag laddar 125gr kulor med hög fart, "gas cutting" är mycket stark, jag tänker. När jag vill skjuta 125gr kulor, jag gör det med min T/C G2 .357 Rem Maximum-pistol. PS: Jag är fösta gånger här, och kan endast skriva so dåligt på svenska och engelska. Kan jag vara här eller måste jag gå?