Jump to content

PlainOldDave

Members
  • Posts

    23
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

PlainOldDave's Achievements

Apprentice

Apprentice (3/17)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. 1-1.5M ejection from a Krag? US Krags are well known for anemic ejection of empties, and that's a Good Thing for reloaders, as the 30-40 is a seasonal caliber here (only made for hunting season, and usually NOT every year).
  2. US reloading manuals generally don't list velocity for starting loads; I have the Lyman book (in storage and can't get to it), but wouldn't be surprised if it followed that rule. A goodly number of manuals don't even provide reduced loads for 6.5 Mausers, either, including my mainstay Lee.
  3. 6.5 Krag ammunition is nonexistent in the US, and 6.5 Krag load data is nearly so. Most US load manuals and component makers insist their 6.5 Swedish Mauser load data can be used in any 6.5x65 rifle. Help?
  4. What other pictures might be helpful?
  5. Google Translate is OK, but you all are right. Technical jargon gets lost in translation. As to loading .44-40, treat it like any other large capacity pistol caliber. Modest velocities and bulky powders. Holy Black or any of the substitutes are a LOT of trouble for a repeater like a 73, and there's good loading data out there for almost ANY pistol powder, and probably some in the Norwegian ladebok for the bulk Winchester bullets you have. They won't hurt the barrel, I had a 73 years ago and shot a good number of the Winchester jacketed bullet loads through it. Surprisingly accurate at 400+ yards, but that's a tale for another day. Modest loads are the order of the day; inside that 73 the mechanism isn't much more than an upside down Luger or a Maxim gun and high velocity loads have been known to force the toggle links open. Google Translate er OK, men dere har rett. Teknisk sjargong blir tapt i oversettelsen. Som til lasting 0,44 til 40, behandle den som en hvilken som helst annen stor kapasitet pistol kaliber. Beskjedne hastigheter og klumpete pulver. Holy Svart eller noen av de erstatter er en masse problemer for en repeater som en 73, og det er gode lasting av data der ute for nesten enhver pistol pulver, og sannsynligvis noen i norsk ladebok for bulk Winchester kuler du har. De vil ikke skade løpet, hadde jeg en 73 år siden, og skutt en god del av Winchester mantlet kule belastninger gjennom den. Overraskende nøyaktig på 400 + yards, men det er en tale for en annen dag. Beskjedne belastninger er rekkefølgen av dagen; inne at 73 mekanismen er ikke mye mer enn en opp-ned Luger eller en Maxim pistol og høy hastighet last har vært kjent for å tvinge vippe lenker åpent.
  6. http://forums.gunboards.com/showthread. ... ir-Courses On phone, and pics kill my data plan. I have learned some about this rifle, but any input the Forum might have is appreciated in advance.
  7. A similar problem to what we have with US-made 6.5x55. US spec for 6.5 base diameter is .473, while Euro spec is .480... Swedish Mauser shooters do report short case life using US cases, and it is widely suspected that the US makers use .30-06 bases to form 6.5x55 from. Et lignende problem med hva vi har med US -laget 6.5x55 . US spec for 6,5 bunndiameter er 0,473 , mens Euro spec er 0,480 ... svenske Mauser skyttere gjør rapportere kort tilfelle liv ved hjelp av amerikanske tilfeller , og det er allment antatt at de amerikanske produsentene bruker 0,30 til 06 baser for å danne 6.5x55 fra .
  8. How's the barrel? For some reason, .25 caliber rifles in general and Remington .25 caliber rifles in particular seem to have poor barrels. I would think the same powders that work well in .32-20 would work well in the .25; Unique, Red Dot, Bullseye. I am a huge Unique fan, but can only imagine how long it's been since there's been any in Norway. As to loading practices, I have good success with the .32-20. I treat it like a tiny RIFLE shell and not a pistol shell. Kiss the case mouth with your expanding die, and use your bullet as an "expanding ball." Seat your bullets by hand in each case. Takes time to be sure, but I rarely lose cases. Hvordan er fat ? For noen grunn, 0,25 kaliber rifler generelt og Remington .25 kaliber rifler særlig synes å ha dårlige fat . Jeg vil tro de samme pulver som fungerer godt i .32-20 ville fungere godt i 0,25 ; Unique, Red Dot , Bullseye . Jeg er en stor Unique fan , men kan bare forestille seg hvor lenge det er siden det har vært noen i Norge . Som til lasting praksis, jeg har god suksess med .32-20 . Jeg behandler det som en liten RIFLE skall og ikke en pistol skall. Kiss tilfelle munnen med ekspanderende dø, og bruke bullet som en " voksende ball." Seat kulene dine for hånd i hvert enkelt tilfelle. Tar tid å være sikker, men jeg mister sjelden tilfeller.
  9. While the .307 and .356 were not much more than semi-rimmed .308 and .358 Winchesters, I would hesitate to use .356WCF load data in your cases made out of .308s. I honestly would have thought you would have extraction problems, and that the .308 cases wouldn't work in your Big Bore. Or is it a Marlin? Never heard of making .356s out of .308s, but I suppose you learn something new every day.
  10. Of all the many I have and have hunted with, including antiquities like the .30 Remington in a pump-action Model 14, a .35 Remington in a Marlin 336, a National Match M1903 Springfield, Mosin-Nagants, and my beloved US Krag, I would have to go with the US .30-40 Krag. The .30-40 Krag is to the .30-06 what the 6.5 Krag is to the 6.5 Swedish Mauser. Does everything the other round does, only a few hundred FPS slower. Which doesn't really matter in our deep East Tennessee woods, where a long shot is 75 yards. With cast bullets, a US Krag is almost bizarrely accurate; the Lyman 311284 was invented as a practice bullet for Krag match shooters back around the turn of the last century. With either 150 or 180gr jacketed bullets, a Krag is deadly on medium-sized game like our Virginia Whitetail deer (Odocoileus virginianus). And the hunter with 220s loaded good and stout (SAFE published data will get you 2100 fps with a 24" barrel) shouldn't feel undergunned facing the largest of game. Townsend Whelen even recommended the 30-40-220 for "silvertip bear." Not that *I'd* go grizzly hunting with a Krag, but he recommended it in The American Rifle back about 1918. And one of the top 10 North American elk was taken with a 30-40 back in 1899, a record that stood for decades. -And translated- Av alle de mange jeg har og har jaktet med, blant annet antikviteter som .30 Remington i en pumpe-action Modell 14, en .35 Remington i en Marlin 336, en National Match M1903 Springfield, Mosin-Nagants, og min elskede US Krag , ville jeg nødt til å gå med USA 0,30 til 40 Krag. Den amerikanske Krag er til 0,30 til 06 hva de 6,5 Krag er til 6.5 svenske Mauser. Gjør alt det andre rundt gjør, bare noen få hundre FPS tregere. Som ikke virkelig betyr noe i våre dype East Tennessee skogen, hvor en lang skudd er 75 yards. Med støpte kuler, er en amerikansk Krag nesten snodig nøyaktig; Lyman 311284 ble oppfunnet som en praksis bullet for Krag kamp skyttere tilbake rundt begynnelsen av forrige århundre. Med enten 150 eller 180gr mantlet kuler, er en Krag dødelig på mellomstore spill som vår Virginia Whitetail hjort (Odocoileus virginianus). Og jegeren med 220s lastet god og stout (SAFE publiserte data får du 2100 fps med en 24 "løp) skal ikke føle undergunned overfor den største av spillet. Townsend Whelen selv anbefalt det 30-40-220 for" Silvertip bjørnen." Ikke at *jeg* gå grizzly jakt med en Krag, men han anbefalte det i "The American Rifle" tilbake ca 1918. Og en av de 10 nordamerikanske elgen ble tatt med en 30-40 tilbake i 1899, en rekord som stått i flere tiår.
  11. I've seen it, and while it DOES address the saved rounds issue you still have the challenge of keeping a .308 (for US Krags) or .264 (for Norwegians) bullet supersonic or at least transonic at 600 yards with the chamber pressure limitations the Krag requires; the flatter shooting .30-06 supplanted the .30 Army in the very early 1920s in this country, as quickly as the teething pains with match-grade .30-06 ammunition were sorted out. In NRA Match Rifle, you win or lose matches at 6. The following link briefly goes over US military rifle shooting, both Service Rifle and Match Rifle. Between these rules and the significant collector value US Krags have, I am sure the Forum will see why, with the exception of CMP Vintage Military Rifle competition, restoring/preserving Krags here is MUCH more prevalent than making match rifles out of them. http://www.egpworld.com/hp/matchrifle/m ... _rifle.htm
  12. Will have to look into them. Lapua doesn't import a particularly broad product line, and what they do import is prodigiously expensive. $15/50 .22 shells as opposed to $5-8/50 for other brands. ..
  13. I love my Krags. That said, the Krag hasn't been a serious match rifle here since shortly after the First World War. Rapid fire (10 shots in 50 seconds by NRA rules ) is just not possible, and the .30-40's rainbow trajectory makes wind doping difficult at best at 600 yards; 20 of the 50 shots in the short National Match Course are single fed at 600 yards, and you still have those 20 in the full length 80 shot course. The "one locking lug" and "cracked locking lug" problems are so accepted here that any Krag's value is almost exclusively as a collectable. Match rifle shooters and hunters alike see Krags as quaint, obsolete relics, and those of us that regularly shoot Krags are a tiny minority.
  14. Something I have found with my 1896 is that she won't shoot pointed bullets as well as roundnoses. Aren't all Lapuas pointed?
  15. A lot of States have similar regulations; in the US hunting law is an almost exclusively State function. I have always liked Sierra bullets, but another issue they have is the crimping cannelure on their 220 grain Game King is placed for the shorter neck for the .30-06, and if used for .30-40 the overall length will be considerably off, and the shells won't fit in the magazine.
×
×
  • Create New...