Jump to content

High Master

Members
  • Posts

    12
  • Joined

  • Last visited

High Master's Achievements

Rookie

Rookie (2/17)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. PPC1500-stevnet i Sarpsborg lørdag 30. mai er ikke avlyst, men starter kl. 14:00 og ikke kl. 10:00 som i terminlisten. Dette blir trolig rettet opp straks.....
  2. I NM i PPC1500 skytes det kun de internasjonale klassene og Modified 1500 (R/P1500 med optiske sikter). Som Øivind skriver så er det andre regler for standardklassene i PPC1500 enn det som følger av de nasjonale reglene for militærpistol/revolverfelt, og spesialpistol/-revolver. Alle disse er tillatt brukt i Open, P/R1500 og Modified1500, men spesialpistol/-revolver er kanskje ikke de mest optimale våpen å skyte med på 50 yard og det gis desverre ikke bonuspoeng for bruk av spesialvåpen... Nedenfor er relgene for de enkelte våpenklassene i PPC1500, og merk spesielt 3.10 Safety parts som gjelder for alle våpenklasser: 3.1 Revolver 1500 A revolver chambered to fire center-fire cartridges .32 caliber or larger. (a) Barrel Barrel length not to exceed 6 inches (135 mm). (b) Sights Sights may be fixed or adjustable, front sight may not extend beyond the muzzle, the maximum sight radius to be no more than 8.5 inches (216 mm). Hooded or telescope sights prohibited. Sight guards may not extend rearward more than 2 inches (51 mm). © Trigger If the revolver has single-action capability the single action trigger pull must be at least 2 ½ lbs. (1135 g). A Trigger stop is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. All revolvers shall use Double action on every stage except on 50 yards/meters were single action is allowed. 3.2 Pistol 1500 Center-fire semi-automatic pistols of .35 caliber or larger, including 9mm and .45 ACP caliber pistols. (a) Barrel Barrel length not to exceed 6 inches (153mm). (b) Sights Sights may be fixed or adjustable. Front sight may not extend beyond the muzzle, maximum sight radius not more than 8.5 inches (216 mm). Hooded or telescope sights prohibited. Sight guards may not extend rearward more than 2 inches (51 mm). © Trigger Trigger pull not less than 3 lbs. (1360 g) single action or for those of double action capability only. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting and a separate thumbrest in front of the trigger. 3.3 Open Match A revolver chambered to fire center-fire cartridges .32 caliber or larger. A center-fire semi-automatic pistol of .35 caliber or larger, including 9mm and .45 ACP. (a) Barrel No restrictions. (b) Sights No restrictions other than the national firearm laws. Optical or electronic, fixed or adjustable. Front sight may not extend beyond the muzzle. © Trigger If the revolver has single-action capability the single action trigger pull must be at least 2 ½ lbs. (1135 g). A Trigger stop is allowed. Trigger pull of a pistol not less than 3 lbs. (1360 g) single action or for those of double action capability only. Recoil control based on compensators, barrel venting or barrel porting is allowed. All revolvers shall use double action on every stage except on 50 yards/meters where single action is allowed. 3.4 Distinguished Revolver A revolver capable of chambering and firing standard 158 grain lead, .38 special load. All revolvers shall use Double action on every stage except on 50 yards/meters were single action is allowed. It must be a factory manufactured revolver with no external modifications. No external or internal modifications may be made to the revolver as manufactured and sold by the factory of origin. Except as provided for below no parts may be removed from the revolver, either externally or internally, nor may any be added. (a) Barrel Barrel length not to exceed 6 inches (135 mm). (b) Sights Fixed or adjustable rear sights from any manufacturer are acceptable. No 3-position-sight or sighting rib is allowed. An adjustable front sight is not allowed. Front sight can have a maximum height of 10 mm. ©Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when firearm is cocked for single action firing. Triggers will be weighed. Any trigger, sold by the original manufacturer of the revolver, without modification, may be used. The honing of the sear or sear notch in the hammer to make a more crisp trigger pull and smooth the action and/or to maintain the required minimum trigger pull is allowed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. See appendix to this rulebook. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. The following are not allowed: trigger shoes; compensator; any external trigger stop device; use of any filler substance to make the front of the trigger smooth; filing or otherwise removing ridges on the trigger; filing or otherwise reducing the trigger width or length, tape on stocks, thumb rests or stocks flared at the base. Any substance (except sweat preventers) which results in a sticky surface to the stock or hand. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. 3.5 Distinguished Pistol Factory manufactured (catalogue item) center-fire semi-automatic pistol of .35 caliber or larger (including 9mm and .45 ACP caliber pistols, .40 S&W and 10 mm Auto). Any accessories, parts and components which are manufactured to duplicate, in materials, shape and dimensions, the original as offered by any of the manufacturers of the pistol, will be accepted. No external modifications are permitted. (a) Barrel Barrel length not to exceed 5 inches (127 mm). Replacement barrels cannot be longer than the original. (b) Sights Open sights, from any manufacturer are acceptable. Rear sights may be fixed or adjustable and fixed open front sights may not extend beyond the front of the slide, with maximum sight radius not more than 7.5 inches (191 mm). © Trigger Trigger pull must not be less than 3 lbs. (1360 g) single action or for those of double action capability only. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand. Finger groove and slip on grips are allowed. Thumb rest grips/stocks or those flared at the base are not allowed nor is tape on the grip or any substance (except sweat preventers) which results in a sticky surface to the grip or hand. Specifically prohibited are full-length Bo-Mar type ribs on the slide, trigger shoes, any system of recoil control based on compensators, barrel venting, or weighted grips or grip panels. 3.6 Standard Revolver 4” A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grip which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 4 inches (102 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when firearm is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.7 Standard Revolver 2,75” A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grips/stocks which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 2,75 inches (70 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when gun is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.8 Standard Revolver 2,75” 5 shot A revolver capable of chambering and firing standard 158 grain lead, .38 special load. It must be a factory manufactured revolver with no external modifications, except for grips/stocks which may be modified or changed because of the size of a competitor’s hand or to facilitate loading. (a) Barrel Barrel length not to exceed 2,75 inches (70 mm). (b) Sights Fixed or adjustable rear sight. Adjustable front sight is not authorized. Front sight must be a ramp or post as sold by the manufacturer of the firearm, ramp may be exchanged for a partridge if so sold. Manufacturer’s sights may be replaced with luminescent night sights (subject to the national firearm laws). © Trigger Must have single and double action capability and must be capable of lifting 2 ½ lbs. (1135 g) when gun is cocked for single action firing. Triggers will be weighed. (d) Grips The grip may be modified or changed because of the size of a competitor’s hand or to facilitate loading. Weighted grips or grip panels are prohibited. Size of grips may not exceed the following measure: base 45 x 60 mm, high 120 mm. (e) Chamfered cylinders are allowed. (f) A crane lock is allowed. Specifically prohibited is any system of recoil control based on compensators, barrel venting or barrel porting. Also prohibited is any substance (except sweat preventers) which results in a sticky surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.9 Standard Semi-Automatic Pistol Mass produced (at least 1,000 produced), factory manufactured (catalog item), center-fire semi-automatic pistol, .35 caliber or larger. (a) Barrel Barrel length not to exceed 5.5 inches (140 mm). (b) Sights Fixed sights only. Manufacturer’s fixed sights may be replaced with other fixed sights such as three (3) dot systems or luminescent night sights if not banned by national firearms laws. © Trigger Trigger pull not less than 3 lbs. (1360 g) single action or for those of double action capability only. The only modification or replacement part allowed is the magazine bumper pad. Specifically prohibited are external modifications except for those listed above. Specifically prohibited are full-length Bo-Mar type ribs on the slide, trigger shoes, extended slide release, extended magazine well funnel and any system of recoil control based on compensators, barrel venting or barrel porting, or weighted grips or grip panels. The pistol must be equipped with standard issue or commercially procured grips of the same size and design. Finger groove and slip on grips are allowed. The grip may be modified or changed because of the size of a competitor’s hand. Thumb rest grips/stocks or those flared at the base are not allowed nor is tape on the grips/stocks or any substance (except sweat preventers) which results in a sticky or dry surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.10 Safety parts No internal modifications may be made that would render the firearm less safe than originally designed by the manufacturer. All standard safety features of the firearm must operate properly.
  3. Som jeg skrev ovenfor så tror jeg at "kravet" til å ha kurs er en misforståelse og som trolig henger igjen i fra de første årene PPC1500 ble skutt i Norge. Det var først snakk om å få PPC1500 under Dynamisk Sportsskyting som har et krav om kurs. Dette ble også praktisert for PPC1500 i de de 2-3 første årene. Etter at PPC1500 ble inntatt som program i NSF, så kan ikke jeg se av reglementet eller andre vedtak at det er et krav til eget kurs for å kunne skyte PPC1500! Jeg er ikke uenig at de som vil begynne med PPC1500 vil være tjent med å få en innføring i regler og sikkerhet. Reglene og sikkerheten er ikke så vanseklig og sette seg inn, men det kan være greit å få en innføring i skytestillinger og annet som kan være greit å tenke på under skytingen. Det gjør det mye lettere å delta i konkurranser når man er trygg på sikkerheten og reglene. Jeg tok kurs i Sverige og synes det var veldig nyttig og bra. Det bidro til at jeg fikk en god start i de første konkurransene og at vi som tok kurset også var med i VM i Tyskland etter 3 stevner i Sverige . Vi var helt trygge på sikkerhet og reglene for scoring og skytestillinger, som gjorde at vi fikk en veldig god opplevelse og motivasjon til fortsette med PPC1500...
  4. Det er ikke krav til eget kurs i PPC1500 for å kunne delta i åpne stevner/konkurranser. Tror det er en misforståelse blant skyttere der ute om at det er et krav. Det er blitt sagt at det er anbefalt å ta et kurs for å få en innføring i reglementet og gjennomgang av de enkelte øvelsene, og ikke minst få gode tips om våpen, utstyr og skytestillinger! I henhold WA1500 reglementet så kreves det kun medlemskap i NSF for å kunne skyte PPC1500 internasjonalt. INDIVIDUALS 2.1 Members of the WA1500 affiliate organizations Any individual who is a member in any national shooting federation. 2.2 Eligibility Authentication It is the competitor’s responsibility to have his current classification in his possession when entering and competing in precision pistol competition tournaments. The competitor must be a member in good standing of his respective national shooting federations or associations in order to enter WA1500 Registered competitions. 2.3 Guest competitors The local Sponsor may agree guest competitors in a Match or tournament. The sponsor is responsible that all conditions of an individual member are fully filed. NSF reglement Jeg har forstått det slik at NSF ved fagkomite pistol har inntatt PPC1500 som skyteprogram iht. gjeldende WA1500 Rules (nå utgave 2013).Det er ikke inntatt krav i NSF sitt reglement om at det kreves et særskilt kurs i PPC1500 for å kunne delta i konkurranser, på lik linje som det ikke kreves eget kurs for å skyte felt eller baneprogram! Så lenge en skytter er medlem av NSF gjennom sin klubb og har gjennomført sikkerhetskurs, er det åpent for alle å skyte PPC1500. Men det er anbefalt å få en innføring i reglementet og sikkerhet, spesielt hva gjelder sikker våpenbehandling, omladning, scoring under matcher og de forskjellige skytestillingene. Det er ikke krav til eget PPC1500 kurs i f.eks. Tyskland eller Tsjekkia, mens det i Sverige er krav for svenske skyttere å ha et godkjenningskurs for PPC1500. Men det er fritt frem for norske skyttere og delta i konkurranser i Sverige uten svensk godkjenningskurs, så lenge skytteren er medlem av NSF, ref. WA1500 Rules pkt. 2.1. NM - EM - VM - Internasjonale konkurranser Alle nasjonale og internasjonale PPC1500 konkurranser er åpent for norske skyttere som er medlem av NSF, så det er bare å melde seg på NM og VM...og andre åpne stevner på terminlisten... Link til NM i PPC1500 i Sarpsborg 19-21. juni :http://www.ppc1500.no Link til VM i PPC1500 i Stockholm 13-16. august: http://www.ppc1500wc2015.se/ Link til WA1500 (internasjonale forbundet): http://www.wa1500.org
  5. Sarpsborg PK har satt opp to stk. stevner i PPC1500 før NM 19-21. juni: - Lørdag 25.april kl. 10:00-15:00 (P1-P8) - Lørdag 30. mai kl. 10:00-15:00 (P1-P8) http://fagkomite-pistol.no/Distrikter/Terminliste2015/01ostfold.htm
  6. JA, bytte baksikte og eventuelt forsikte er helt greit. Men modellen må også ha vært levert med faste sikter som standard, og være produsert i min. 1000 eksemplarer. NEI, det er i utgangspunktet ikke tillatt med modifisering av delene, dvs. slipe ned og nettskjære fjærhus eller bytte til en annen avtrekker enn det som er levert originalt. Men for 1911 modeller så har det vært levert mye forskjellig "originalt" og de fleste produsenter har hatt forskjellige "options", så jeg tror det vil være mulig å finne drop-inn deler som er "lik" originalen" og som vil være OK.
  7. Reglementet i WA1500 sier følgende om Standardpistol faste sikter: 3.9 Standard Semi-Automatic Pistol Mass produced (at least 1,000 produced), factory manufactured (catalog item), center-fire semi-automatic pistol, .35 caliber or larger. (a) Barrel Barrel length not to exceed 5.5 inches (140 mm). (b) Sights Fixed sights only. Manufacturer’s fixed sights may be replaced with other fixed sights such as three (3) dot systems or luminescent night sights if not banned by national firearms laws. © Trigger Trigger pull not less than 3 lbs. (1360 g) single action or for those of double action capability only. The only modification or replacement part allowed is the magazine bumper pad. Specifically prohibited are external modifications except for those listed above. Specifically prohibited are full-length Bo-Mar type ribs on the slide, trigger shoes, extended slide release, extended magazine well funnel and any system of recoil control based on compensators, barrel venting or barrel porting, or weighted grips or grip panels. The pistol must be equipped with standard issue or commercially procured grips of the same size and design. Finger groove and slip on grips are allowed. The grip may be modified or changed because of the size of a competitor’s hand. Thumb rest grips/stocks or those flared at the base are not allowed nor is tape on the grips/stocks or any substance (except sweat preventers) which results in a sticky or dry surface to the grip or hand. In determining whether a specific firearm meets the spirit and intent as well as the letter of this Rule, it should be remembered that this is meant to be a totally stock firearm. 3.10 Safety parts No internal modifications may be made that would render the firearm less safe than originally designed by the manufacturer. All standard safety features of the firearm must operate properly. ________________________________________________________________________________________ Det vil si at du kan bytte ut siktemidler med hvilken som helst annen type (også fiberoptisk), så lenge det er faste siktemidler. Foruten å bytte til et annet grep (uten tommelstøtte eller "flared") som kan tilpasses, er det tillatt å montere "bumper pads" på magasinene. Alle endre deler skal være lik originaldelene på våpenet! NB! Det er heller ikke tillatt å endre indre innvendige sikringer og alle standard sikringer skal fungere (grepssikring/avtrekkssikring etc.).
  8. Husk også at ammunisjon må klare faktorkravet på 120 for Standard pistol faste sikter: WA1500 RULES 3.13 Ammunition (a) General No high speed or Magnum ammunition will be allowed. All ammunition must be loaded for and produce sufficient velocity to pass through the target and the backer. Shots which do not pass through the target and the backer will be scored as misses. . . . (h) Standard Semi-Automatic Pistol Either hand loaded or factory loaded ammunition. Caliber .35 or larger may be used. No midrange wadcutter ammunition will be allowed. A minimum factor of 120 is mandatory.
  9. Ja, du kan bruke "feltladninger" i revolver 1500, da det ikke er krav til faktor, kuleype eller kulevekt. I de andre revolverøvelsene kan du f. eks. benytte H&N 158 HPHS, eller andre typer av kuler i 158 grain som IKKE er full wadcutter (RN, TC, SWC etc.).
  10. I revolver 1500 er det ikke krav til kuletype eller kulevekt uten om at det skal være .32 -.45 caliber. Det vil si at wadcutter, semiwadcutter, rundnese etc. er tillatt. I de andre revolverklassene (Standard revolver 6 - 4 - 2,75 tom) så SKAL det benyttes 158 grains kule, men det er ikke tillatt med full wadcutter. Det vil si et det er tillatt med semiwadcutter, rundnese, HP eller truncted (TC) etc. som ikke er full wadcutter. I tillegg gjelder faktorkravet på 110 for SR 6 og 80 for SR 4 og 2,75.
  11. Oppegård Skytterlag skal søke om å arrangere første offisielle NM i PPC 1500 på Kurud 23.-25. august, hvor det blir skutt alle de 8 offisielle PPC øvelsene, som omfatter: - Pistol 1500 (150 sk.) - Revolver 1500 (150 sk.) - Standard Pistol 5" (60 sk.) - Standard Pistol Faste Sikter 5" (48 sk.) - Standard Revolver 6" (60 sk.) - Standard Revolver 4" (48 sk.) - Standard Revolver 2,75" (48 sk.) - Open Pistol/Revolver (60 sk.) I tillegg blir det klubblagskyting (2-mannslag) for Pistol og Revolver (siste 60 skudd fra 1500-matchene) Det blir medalje og premiering iht. NSF regler for NM. Stevnet vil også være "Norway Open" iht. WA1500 sine regler, som innebærer at utenlandske skyttere kan delta. Det vil bli kåret "Over all winner" i de 8 øvelsene og lag, i tillegg til premiering for de 3 beste i hver klasse (High master - Master - Expert - Sharpshooter - Marksman). Mer info kommer snart.......
  12. EM - TSJEKKIA Det hadde vært gøy å vite hvem som har tenkt seg ned til EM i Tsjekkia i august ? Link: http://wa1500.org/competitions.php" I år så går det i Budweis og det kan jo ikke bli feil...og blir nok veldig gøy uansett hva man presterer på eller utenfor banen...
×
×
  • Create New...